Is it possible with the QTR RIP to print on Epson printer (in my case 3800) with black ink only (NO light or light light black) or black and yellow ink only?
> Date: Mon, 13 Apr 2009 10:18:10 -0500
> From: email@example.com
> Subject: Re: green-yellow
> To: firstname.lastname@example.org
> This chart is measurement data taken from the very useful ink
> percentage test that you can print using the QTR RIP. And we have
> found that the colors are additive. ( I use we, because Michael
> Mutmansky and I sort of put this thing through the wringer about two
> years ago and he had this hunch that the colors might additive, and
> sure enough, the testing proved it to be true)
> The ink load remark was to point out that if you print out 100% of
> each ink color, you will have a big puddle of ink on your pictorico.
> So you need to take into account the cumulative ink load (in percent)
> for all the colors you are using to avoid over-inking the substrate
> you are printing on.
> > Now, that I have received Clay's chart, I find it fascinating....but
> > I need to clarify this, Clay. Clay, if I am hearing you correctly,
> > your chart shows/proves that UV density is additive when colors are
> > mixed. That much is correct (which dovetails with Alberto's
> > information)? But you also seem to say that there is more ink laid
> > down, is that correct, too? But in your system, you lessen the ink
> > load, correct again? Sorry if these seem so dense but I want to
> > really understand this so I can file it in my brain file cabinet and
> > put it to rest.
> > Chris
Windows Live™: Keep your life in sync. Check it out.