Re: Alt print on Glass?
- To: email@example.com
- Subject: Re: Alt print on Glass?
- From: peter warwick <firstname.lastname@example.org>
- Date: Mon, 18 May 2009 15:51:11 +0100
- Comments: "alt-photo-process mailing list"
- Delivered-to: email@example.com
- List-id: alt-photo-process mailing list <firstname.lastname@example.org>
- Reply-to: email@example.com
- User-agent: Pipex Webmail (IMP3.1)
there was an interesting post by Marek last year, that described printing Carbon directly onto glass by exposing
through the back of a glass plate. Its in the archive here:
Carbon might not have been a process you had in mind, but its not too complicated when there is no transfer involved
and you can choose any colour you like.
I did give it a try, but because i used a UV bank my results were fairly fuzzy but well adhered to the glass. On as
side note, it also prompted me to have a go and coat some tissue as well, and ended up making my first carbon print.
(so thanks Marek if you read this!)
(first time poster - avid reader)
Jacek Gonsalves wrote:
> Hi all,
> Has anyone had success on printing on glass? I'm going to try and
> brush a gelatin coat on and see how that goes. Hopefully the gelatin
> will stick, though perhaps I need to sand the glass slightly to give
> it some tooth?
> From there I'm going to try a cyanotype print. Should be intresting!
Visit Pipex Business: The homepage for UK Small Businesses
Go to http://www.pipex.co.uk/business-services