From: Scott Wainer (firstname.lastname@example.org)
Date: 12/09/02-08:58:46 PM Z
Thanks for the help.
I just put a hardened first coat on another batch of papers and we'll see
I thought that the first size on last night's prints might have softened due
to the wash water being near 80F, causing the gelatin to dissolve. I'll also
try washing at a lower temperature.
----- Original Message -----
> This all sounds not unreasonable. Try hardening both both gel coats, and
> allow a bit longer after the second coat to ensure full hardening. I
> would not have expected un-hardened gel to dissolve under your processing
> Richard Urmonas
This archive was generated by hypermail 2.1.5 : 01/31/03-09:31:25 AM Z CST