From: Shannon Stoney (email@example.com)
Date: 09/24/02-04:15:46 PM Z
>Shannon, the marks are from loading the film - either when placed in the
>holder (4x5) or when placed onto the developing reels 35/2-1/4. Too much
>pressure with the thumb causes the film to crease and the result is what
Could this happen even with 8x10 film?
>----- Original Message -----
>From: "Shannon Stoney" <firstname.lastname@example.org>
>Sent: Tuesday, September 24, 2002 12:43 PM
>Subject: weird flare on film?
>> Today I was trying to print a negative that had some strange kind of
>> arc-shaped marks on it. At first I thought it was caused by the
>> glass of the printing frame, so I cleaned it again. But no, it is in
>> the negative, and not on the surface, but evidently part of the
>> image. Is it some sort of flare? On the print it looks as if
>> somebody took a white china marker and made semi-circular marks about
> > a half inch in length, somewhat concentric to each other.
> > --shannon
This archive was generated by hypermail 2.1.5 : 10/01/02-03:47:10 PM Z CST